EQUIPMENT (SMT)

FUJI GSP-II SCREEN PRINTER :

• Vision correction for printing 0.4 mm fine-pitch patterns
• Automatic screen alignment eliminates trial-and-error test printing.
• Self-adjusting screen position maintains evenly distributed squeegee pressure.
• Programmable squeegee speed
• Programmable solder paste knead cycle
• In-line system compatibility
• PCB warp control
• Support of board widths 20”x18” (508x457 mm)

FUJI GL-II GLUE DISPENSER :

• Vision correction system
• Computer-controlled temperature
• Glue Dot Feedback Control
• Programmable syringe action
• In-line system compatability
• Preheat timer

• High-speed 0.25 sec/component 2 Nos. placing.
• Vision correction system
• Components as high as 6 mm can be placed
• Sequencer - Universal 2596A - 80 station
• Axial Insertion 62874 - 2 Nos.
• Radial insertion - Universal - 6348A - 60 station

FUJI IP-III FINE PITCH PLACER :

• Placeable parts range from 1005s to 74x74s, including TABs, GQFPs, BGAs etc.
• Handling of full-grid BGAs
• Parts with fine pitch leads (0.15 mm) can be placed
• Placing rate 0.55 seconds/part for small chips, 1.25 sec/shot for IC parts and 2.5 sec/ shot for tray parts (under optimal conditions)
• Placing accuracy of P 0.025 mm for QFPs, GQFPs and TABs and + 0.11 mm for parts with leads on 4 sides
• Coplanarity check
• Simultaneous width adjustment of Y-table and the in-and-out conveyors

CONCEPTRONIX REFLOW OVEN :

• FORCED CONVECTION
• 5 - HEATING ZONES

AUTOMATIC LOADER
IN - LINE INSPECTION CONVEYORS.

EQUIPMENT (THRU HOLE & TESTING)

• Component Pre-forming
  
    - Make : Olamef, Italy
    - Power & Pneumatic Operated
    - Suitable for Axial & Radial Components
    - Kinks & Cutting of Component Leads

• Wave Soldering
  
    - Make : Electrovert USA
    - Nitrogen Contour for worldclass soldering
    - Dual wave for Mixed , Thru-hole & SMT Boards
    - Max. Board size : 400 mm
    - No Clean Flux Process

• In Circuit Tester
  
    - Make : Teradyne USA
    - Test Points, 512 expandable 2048

• Burn - in Test Chamber

• Functional dedicated Test Jigs

• Soldering & Desoldering Stations
  
    - Make : Weller / Hakko / O. K.

QUOTATION FORMAT

With our objectives to build a long term business relationship with our clients in their decision making, all our quatation shall be submitted in the following format :

1. Direct Material Cost - Which includes Supplier’s Name, Part Number and price for individual Components
2. Additional Cost - Which includes our Overhead and Margin.
3. Direct Labour Cost
4. In-Circuit Testing Cost
5. Burn-In Cost
6. Board Functional Test Cost
7. Packaging Cost
8. Taxes as applicable
9. Terms and Conditions of Sales.

CUSTOMER'S DOCUMENTS

In view of submitting of comprehensive quotation, let alone fast response, We have compiled the necessary documents as follows.

a) Bill of Material
b) Assembly Drawing
c) Quality Requirements
d) Raw Printed Circuit Board Specification
e) Test / Burn-in specification - where applicable
f) Packaging requirements
g) Mode of Transportation
h) Annual Quantities
i) An Assembled Board - If available
j) Terms and Conditions of purchase

We shall return all documents received for the purpose of quotation upon request.